Voltage Range
AC Single phase, 3 wires (L, N + G), 100V~320V,50/60Hz
Suppressing Surges
Lightning Flash Surge ; power switching surges ; Switching Inrush Current ; Electric Magnetic Pulse
Method to Handle Surge Energy
Surge Energy Transfer to Voltage, then release to later consecutive waves
Protection Mode
Line(L) –Neutral(N) ; Line(L) – Ground(G) ; Neutral(N) – Ground(G)
Residue Voltage
775Vp ±20% (combination surge wave, 6KV/3KA)
Input Impedance without loads
> 10 M Ohm
AC wave Form Affected
≦ 10 mS
Max impulse current , 8x20μs
10KA @ 8x20μs wave , one time in pos & neg. wave
Max Surge Immunity Test
15KV @ 1.2x50μs; 7.5KA @ 8/20μs , 2 times in 90 sec interval
Surge Energy Absorbing Rate
97 % , at 1.2x50μs,10kV / 8x20μs, 5kA Combination wave
Ground Resistance Requirement
No Requirement (Any resistance value is no influence to surge protection function)
EMP/EFT Suppressed Rate
95%, at 4.5kV in 5x50ns EFT(Elec. Fast Transient/ Burst) waveform
Compliance standards
ANSI C62.41, cat. C, high exposure, IEC 61643-1, IEC 61000-4-4(X-level,4.5KV), IEC 61000-4-5 (X-level,15KV)
Dimension & Weight
65/84L x 37/43W x 39/41H , mm / 130 g
Enclosure & Material
Industrial Fire Proof Plastic , IP65 / Fixed by screws & DIN rail
Operation temp. / Rel. Humidity
-20°C ~ 85°C / 35% ~ 95% RH (no condensation)
